Heavy Duty Workbench P-3-17-01

Heavy Duty Workbench WITH 3 CABINETS (4 drawers + 2 door) (P-3-17-01)

- solid construction of the table made of closed profile cold rolled 45 x 45 x 2 mm

- table beams made of cold rolled profile 40 x 40 x 2 mm, 35 x 35 x 2 mm

- the table structure is completely welded and twisted

- table legs protected against scratches by plastic inserts

- 40 mm thick multi-layer worktop

- the workbench construction allows the set of screws to be leveled (to be purchased as a separate item)

- three table cabinets made entirely of high quality 1.0 mm thick sheet steel

- four drawers mounted on ball guides for complete removal

- static load of drawers up to 60 kg

- Aluminum - satin drawer handles for comfortable hanging out

- the bottom of the drawers lined with rubber damping general purpose

- drawers lockable with central lock and lock with two keys included

- drawer internal dimensions: width 557 mm, depth 395 mm

- two additional lockers with door and two lock key included

- inside the cabinet with the door there is a non-floating shelf

- door hinged on the inside hinges, opening angle of the door 115 degrees

- door dimensions: width 405 mm, height 480 mm

Table tops are available in five configurations:

01. top made of impregnated plywood with a thickness of 40 mm

02. top made of plywood 40 mm thick, additionally lined with rubber mat Olejo Benzyno Resistant with a thickness of 2.0 mm, and additionally the edges of the table covered with galvanized steel angle

03. top made of plywood with a thickness of 40 mm, additionally lined with galvanized sheet of thick. 1.0 mm bent sheet at the right angle on the sides and at the back, front folded and bent at the bottom of the worktop. Always replace the zinc plated sheet after a long service life

04. top made of beech slab 40 mm thick, width 41 mm (top of this type is made with oiled finish and rounded corners)

05. 40mm plywood top, 3mm thick, polyurethane resistant to chemical solvents (petrol, oils, brake fluids), acids and chemicals (phosphoric acid, hydrogen sulphide). Polyurethane coating creates impact resistant (300% stretch) elastic surface, indicated for mechanical work - these countertops are available on individual orders.

Table top width 1900mm, depth 600mm
Total height 890mm
Static weight 1500kg
Design Cold-closed profile 45x45x2 mm, 40x40x2 mm, 35x35x2 mm
Type of countertop Plywood multilayer glued thickness: 40mm, possible additional cover by. Select from the list next to the picture.
Static load capacity 60 kg
Guide Type Steel Telescopic Ball - Extend 90-95%
Weight 129kg
Paint coating Powder coating
Available colors Select from the drop-down list next to the product picture
Handles Aluminum satin
Protective mat Yes. In drawers and shelves.
Closure Door lock for the door. Drawer with central lock. 2 keys for each cabinet included.
Shipping method Completely assembled. Ready for use.